I have written about the Timed LED Lighting Controller in previous posts. Starting with the original entry “Stairwell Foot Lighting System”. In this entry I will be wrapping up the project and describing the change of direction from the initial design and layout. There may be a bit of overlap but it will be minimal as the project took a small deviation along the way.
Continue reading Wrapping up the Timed LED Lighting Controller Project
In the last entry for the Timed LED Lighting Controller, I realised that there are no working examples of an I²C driver for the ATtiny20. I then had to work through the data sheet to implement my own. With that done, I could then start on the application firmware and get the board really working. So this is where my proof of concept becomes the prototype.
Continue reading From Proof of Concept to Prototype
In this post I describe the trials an tribulations of bringing up my Timed LED Lighting Controller and how I went about implementing my first I²C Slave Driver for the ATTiny20.
Continue reading Back to Blinky